Digital Automatic Pipe-Tube Bender with 202 Die Pkg. 1502BA-202


Brand: Bend-Pak
Model: 1502-BA-202

BendPak has been building benders for more than three decades, with a single overriding priority - performance. Our assembly guys and R & D teams are constantly testing each model as it comes off the assembly line to make sure that no corners are cut. Each phase of production is scrutinized by team leaders whose only responsibility is to make sure that everything works and works right. No, we’re not the only bender manufacturer out there. There are others, but not as dedicated and well respected.

Free Shipping on this Bend-Pak 1502-BA-202 Tube/Pipe Bender & all Bend-Pak Pipe-Tube Benders
Please Call for Availability
800 834 2299


Bend-Pak 1502-BA-202 Pipe Bender Features:

  • Two separate end finishing units at rear for all necessary flaring and expanding
  • Digital control for automatic or manual bending operations
  • Includes 202 die package
  • Comes complete with quick release bending and end finishing dies
  • Includes high-speed clampless swager and internal expander
  • Updated bend data system available for automobiles and light trucks dating back to 1960
  • Clampless swager - easy to use drop-in collars makes swaging operations quick and efficient
  • Twist-lock tooling - quick change tooling saves time
  • Integrated power relief control valve - control valve features oversize handles and built in pressure relief system
  • Pass-through cylinder stem - the top cylinder stem passes completely through the main frame
  • Rigid frame - a rigid 6” x 6” x 3/8” welded steel tube is used for the main frame
  • Commercial grade hydraulic cylinders - industrial cylinders provides better performance and reliability
  • Chrome-molly shafts - all cylinders features hardened chrome-molly shafts that conform to ANSI 92.2 standards
  • Quick release bending dies - quick change tooling means faster set up times
  • Precision ground bending head - all bending head surfaces are surface ground within .002 of an inch
  • Clutter free bending area - controls are enclosed to keep the front obstruction free
  • Oversize barrel shafts - large 2-1/2” diameter machined steel barrel shafts used in conjunction with oil impregnated bronze bushings provide ultimate dependability and minimum maintenance
  • Grease fittings - standard grease fittings allow for simple lubrication
  • Controls - NEMA rated on/off switch box incorporates overload relays that automatically disrupt power supply should an over-current situation occur
  • Pressure gauges - know exactly what the system pressures are at all times
  • Industrial grade casters - large cast iron casters help you easily move the bender around your shop
  • Remote foot operated controls - our automatic models are equipped with remote foot switches for added operator convenience
  • Adjustable pressure valve - adjust back gate pressure easily with this adjustment screw located right up front
  • One piece barrel - a one piece solid steel barrel is your assurance that the bending gates stay perfectly aligned with the bending ram
  • Heat-treated tooling - all machined steel tooling is heat treated for greater service life
  • Convenient tool trays - keeps your tooling organized
  • Strong motor - a large 5 HP Baldor energy efficient motor is used for maximum performance
  • Direct-drive pump - a direct-drive high speed 4 GPM pump is used for maximum power and performance
  • Single enclosed bottom cylinder - this single bottom cylinder applies pressure evenly to the back gates and because it is hidden, does not interfere with the tubing
  • Large capacity reservoir - a large fluid reservoir keeps the hydraulic oil running cooler and contamination to a minimum
  • Filtered hydraulic system - a canister type oil filter keeps the oil contamination free
  • Oil sight gauges - allows you to visually inspect oil levels
  • Over size hose - we purposely use 1/2” high pressure hose for better speed and cooling characteristics
  • Open sided swager box - means easier access and less chance of “crashing” tools and damaging the cylinder

Bend-Pak 1502-BA-202 Pipe Bender Specifications:

  • Maximum bending radius: 5" / 127 mm.
  • Minimum bending radius: 3-1/2" / 89 mm.
  • Maximum tube capacity: 3" / 76 mm. / .095 wall
  • Dies supplied ( 202 Die package ): 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2" **
  • Top cylinder working force: 60,000 lbs.
  • Hydraulic filter: 60,000 lbs.
  • Standard motor: 5-HP / 208-230 VAC / 60 HZ. / 1ph.*

* Special voltages available upon request

** Contact factory for metric sizes available the design, material and specifications are subject to change without notice.

Bend-Pak 1502-BA-202 Pipe Bender Shipping Information:

  • Dimensions - 1300 lbs. / 590 kg.
  • Shipping Weight - 48" x 70" x 30" / 1219 mm. x 1778 mm. x 762 mm.
Free Shipping on this Bend-Pak 1502-BA-202 Tube/Pipe Bender & all Bend-Pak Pipe-Tube Benders


  • 1502BA-202
  • 1502BA-202
  • Bend-Pak
  • New

Shipping Information

  • Item Requires Shipping
  • Free Shipping!


Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.

  • Have a question? Ask the Pros
  • 800 834 2299Mon - Fri 9:00 - 5:00 PM PST